300ZX/Z31 RT BBK
2 posts
• Page 1 of 1
300ZX/Z31 RT BBK
by zAlex » Wed Sep 19, 2018 4:06 pm
I'm in the thought process of purchasing the kit, but my one concern is what is the availability in parts for a rebuild if need be?
I have read the entire thread of this post: . And there was nothing about a rebuild. Though on the first page with the mock-up rotor and brembo. Is it possible that the hardware used in the RT is the same?
I have read the entire thread of this post: . And there was nothing about a rebuild. Though on the first page with the mock-up rotor and brembo. Is it possible that the hardware used in the RT is the same?
Re: 300ZX/Z31 RT BBK
by support » Sun Dec 30, 2018 1:04 pm
Apologies for late reply, too busy with supply chain stuff...
The Brembo F50 40mm piston seals are the ones you need, hopefully you can source just that size without getting a 44/40mm rebuild kit, but if not you'd need to order a second set and discard the 44mm parts.
The F50 design is also used by Jaguar and other manufacturers possibly with 40/36mm pistons, same routine with those.
The Brembo F50 40mm piston seals are the ones you need, hopefully you can source just that size without getting a 44/40mm rebuild kit, but if not you'd need to order a second set and discard the 44mm parts.
The F50 design is also used by Jaguar and other manufacturers possibly with 40/36mm pistons, same routine with those.
2 posts
• Page 1 of 1
Return to Product Support/Feedback
Who is online
Users browsing this forum: No registered users and 2 guests